Search results for "BENI CULTURALI"

showing 10 items of 1017 documents

Analysis of 7Be and 210Pb concentration and 7Be/210Pb activity ratio in ground level air in Palermo (Italy)

2019

A series of measurements of particulate samples collected on paper filters in Palermo (Italy) during 1995–2005 has been performed to detect 210Pb air activity concentration and, along with previous similar data on 7Be, to evaluate their activity ratio. Average values for the daily activity concentrations of 7Be and 210Pb are found to be 4.7 and 0.6 mBq/m3 , respectively, 9.8 being the average activity ratio. Data confirm a seasonal behavior for both radionuclides. A correlation between 7Be and 210Pb air activity concentrations seems to exist, despite their different origins. The time behaviors of both 7Be and 210Pb air concentrations and 7Be/ 210Pb activity ratio have been compared with som…

010302 applied physicsNuclear and High Energy PhysicsRadiationSettore ING-IND/20 - Misure E Strumentazione Nucleari02 engineering and technologyParticulates021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesPalermoSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Settore FIS/03 - Fisica Della MateriaGround levelair particulateEnvironmental chemistry7Be0103 physical sciencesActivity concentrationEnvironmental scienceGeneral Materials Science0210 nano-technologyactivity concentration210Pb
researchProduct

First discovery of orichalcum ingots from the remains of a 6th century BC shipwreck near Gela (Sicily) seabed

2017

Ingots recently recovered from the seabed near Gela, a major harbour of Sicily, reveal an unexpected side of ancient metallurgy. The ingots were found near remains of a ship and earthenware dated around the end of the VI century BC and probably coming from the eastern Mediterranean and the Aegean sea. The ingots were analysed by means of X-Ray Fluorescence spectroscopy via a portable spectrometer. Results indicate that they are mostly consist of copper and zinc although many of them have a significant amount of lead. This alloy is nowday called brass, but in ancient time it was know as orichalcum, one of the rarest and most precious alloy along with gold and silver. Only small items of oric…

010506 paleontologyArcheology060102 archaeologyArcheology (arts and humanities)06 humanities and the artsOrichalcum01 natural sciencesSettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni CulturaliX-rays fluorescenceingotsingotOrichalcum ingots X-rays fluorescence archaeometallurgyarchaeometallurgy0601 history and archaeology0105 earth and related environmental sciencesSettore CHIM/02 - Chimica Fisica
researchProduct

New results in ancient Maya rituals researches: The study of human painted bones fragments from Calakmul archaeological site (Mexico)

2020

Abstract The funeral chambers of the ancient city of Calakmul (Mexico) and the individuals who were buried in them have brought in recent decades new knowledge about the beliefs and funeral customs of the pre-Hispanic Maya. Tombs and bodies were prepared as part of the rituals that should favor the return of ch'ulel to the Underworld, known as Xibalba by the ancient Maya. The ch'ulel is one of the two anemic entities that inhabit the individual, equivalent to our concept of the soul. Bodies preparation included coloured scented body ointments application, with a deep symbolic connotation and probably also a conservative purpose. The aim of this research was to characterize pigments and bind…

010506 paleontologyArcheologyAncient citymedia_common.quotation_subjectCalakmulMortuary ceremoniesTransmitted lightClassic periodHuman bone01 natural sciencesNatural gumSEM-EDXMaya0601 history and archaeologyGC–MSSettore CHIM/12 - Chimica dell'Ambiente e dei Beni Culturali0105 earth and related environmental sciencesmedia_commonPainted dead bodies060102 archaeologyHevea Brasilliensis06 humanities and the artsArtArchaeologyPy-GC-MSOrganic fractionCinnabarMayaOrganic componentMaya Calakmul Classic period Painted dead bodies Mortuary ceremonies SEM-EDX GC–MS Py-GC-MS Natural gum Hevea BrasilliensisAncient maya
researchProduct

Stochastic models for phytoplankton dynamics in Mediterranean Sea

2016

Abstract In this paper, we review some results obtained from three one-dimensional stochastic models, which were used to analyze picophytoplankton dynamics in two sites of the Mediterranean Sea. Firstly, we present a stochastic advection–reaction–diffusion model to describe the vertical spatial distribution of picoeukaryotes in a site of the Sicily Channel. The second model, which is an extended version of the first one, is used to obtain the vertical stationary profiles of two groups of picophytoplankton, i.e. Pelagophytes and Prochlorococcus, in the same marine site as in the previous case. Here, we include intraspecific competition of picophytoplanktonic groups for limiting factors, i.e.…

0106 biological sciences010504 meteorology & atmospheric sciencesStochastic modellingRandom processeAtmospheric sciences01 natural sciencesDeep chlorophyll maximum; Marine ecosystems; Phytoplankton dynamics; Random processes; Spatial ecology; Stochastic differential equations; Ecology Evolution Behavior and Systematics; Ecological ModelingStochastic differential equationMediterranean seaMarine ecosystemSpatial ecology14. Life underwaterPhytoplankton dynamicEcology Evolution Behavior and Systematics0105 earth and related environmental sciencesDeep chlorophyll maximumStochastic differential equationbiologyStochastic processEcology010604 marine biology & hydrobiologyEcological Modelingbiology.organism_classificationEcology Evolution Behavior and SystematicSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Light intensitySpatial ecologyDeep chlorophyll maximumProchlorococcusEcological Complexity
researchProduct

The role of noise on the steady state distributions of phytoplankton populations

2016

The spatio-temporal behaviour of total chlorophyll concentration is investigated in the middle of the Tyrrhenian Sea by using a stochastic approach. The study is based on a reaction-diffusion-taxis model, which is used to analyse the dynamics of five phytoplankton groups, responsible for about 80% of the total chlorophyll a inside the euphotic zone of the water column. The analysis is performed by considering: (i) the intraspecific competition of the phytoplanktonic groups for limiting factors, i.e. light intensity and nutrient concentration, (ii) the seasonal changes of environmental variables, and (iii) the random fluctuations of the components of the velocity field and temperature. Speci…

0106 biological sciencesStatistics and ProbabilityPhysicsSteady state (electronics)010504 meteorology & atmospheric sciences010604 marine biology & hydrobiologyturbulenceHydrodynamic fluctuationstochastic processes (theory)Statistical and Nonlinear Physics01 natural sciencesSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)NoisePhytoplanktonHydrodynamic fluctuations; stochastic particle dynamics (theory); stochastic processes (theory); turbulence; Statistical and Nonlinear Physics; Statistics and Probability; Statistics Probability and Uncertaintystochastic particle dynamics (theory)Statistical physicsStatistics Probability and UncertaintyStatistical and Nonlinear Physic0105 earth and related environmental sciencesJournal of Statistical Mechanics: Theory and Experiment
researchProduct

II) Wood pellets for home heating can be considered environmentally friendly fuels? Heavy metals determination by inductively coupled plasma-optical …

2016

Abstract The aim of the present study was to determine the concentrations of twelve potentially hazardous elements in wood pellet ashes obtained by the combustion of 13 pellet brands for sale in Italy, the impact of adding the ashes to soils and health risk of operator due to dust exposure. Samples were analysed by Inductively Coupled Plasma Optical Emission Spectrometry. The concentrations of heavy metals in ashes from stoves ranged from 0.41 to 7.2 mg kg − 1 for As, from 1.3 to 12 mg kg − 1 for Sb, from 1.8 to 12 mg kg − 1 for Zn, from 0.23 to 0.8 mg kg − 1 for Pb, from 0.18 to 2.8 mg kg − 1 for Ni, from 0.09 to 1.0 mg kg − 1 for Cd, from 0.46 to 3.4 mg kg − 1 for Cr, from 0.94 to 2.7 mg …

020209 energyPelletschemistry.chemical_elementCombustion02 engineering and technology010501 environmental sciencesCombustion01 natural sciencesSettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni CulturaliAnalytical ChemistryPelletPellet0202 electrical engineering electronic engineering information engineeringSettore CHIM/01 - Chimica AnaliticaSpectroscopy0105 earth and related environmental sciencesCadmiumStoveMetalMetallurgyWood ashWoodchemistryMetalsStoveInductively coupled plasma atomic emission spectroscopyEnvironmental scienceInductively coupled plasma
researchProduct

Wood pellets for home heating can be considered environmentally friendly fuels? Polycyclic aromatic hydrocarbons (PAHs) in their ashes

2016

This paper reports the results of the first quantitative investigations of PAHs in wood pellet ashes. Investigations were carried out into the fifteen PAHs identified by the US-Environment Protection Agency (US-EPA) as requiring priority monitoring; other non-US-EPA listed PAHs and perylene were also investigated. The total concentrations for the 17 investigated compounds, expressed as the sum of the concentrations (∑PAHs), in the ashes produced by the wood pellet combustion, ranged from 0.064mg kg-1 to 0.90mg kg-1 of dry weight with a means of 0.31mg kg-1. The lowest concentrations (<0.1mg kg-1) were measured in the conifer ash samples. Concentrations of PAHs found in this paper will al…

0211 other engineering and technologiesPelletsCombustion02 engineering and technology010501 environmental sciencesCombustioncomplex mixtures01 natural sciencesSettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni CulturaliAnalytical ChemistryPelletPAHsDry weightPelletSettore CHIM/01 - Chimica AnaliticaSpectroscopy0105 earth and related environmental sciences021110 strategic defence & security studiesStoveChemistrytechnology industry and agricultureWood ashPAHWoodEnvironmentally friendlyEnvironmental chemistryStovePolycyclic HydrocarbonsMicrochemical Journal
researchProduct

X-ray response of CdZnTe detectors grown by the vertical Bridgman technique: Energy, temperature and high flux effects

2016

Abstract Nowadays, CdZnTe (CZT) is one of the key materials for the development of room temperature X-ray and gamma ray detectors and great efforts have been made on both the device and the crystal growth technologies. In this work, we present the results of spectroscopic investigations on new boron oxide encapsulated vertical Bridgman (B-VB) grown CZT detectors, recently developed at IMEM-CNR Parma, Italy. Several detectors, with the same electrode layout (gold electroless contacts) and different thicknesses (1 and 2.5 mm), were realized: the cathode is a planar electrode covering the detector surface (4.1×4.1 mm2), while the anode is a central electrode (2×2 mm2) surrounded by a guard-rin…

0301 basic medicine030103 biophysicsNuclear and High Energy PhysicsHigh fluxDigital pulse shape analysi01 natural sciencesBoron oxide encapsulated vertical Bridgmanlaw.invention03 medical and health scienceslaw0103 physical sciencesPolarization (electrochemistry)InstrumentationPhysicsX-ray and gamma ray detectors010308 nuclear & particles physicsbusiness.industryCdZnTe detectorsCdZnTe detectorEnergy-resolved photon counting detectorSettore FIS/01 - Fisica SperimentaleDetectorGamma raySettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)CathodePhoton countingAnodeFull width at half maximumElectrodeEnergy-resolved photon counting detectorsOptoelectronicsDigital pulse shape analysisbusinessNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
researchProduct

Digital fast pulse shape and height analysis on cadmium-zinc-telluride arrays for high-flux energy-resolved X-ray imaging.

2017

Cadmium-zinc-telluride (CZT) arrays with photon-counting and energy-resolving capabilities are widely proposed for next-generation X-ray imaging systems. This work presents the performance of a 2â...mm-thick CZT pixel detector, with pixel pitches of 500 and 250â...μm, dc coupled to a fast and low-noise ASIC (PIXIE ASIC), characterized only by the preamplifier stage. A custom 16-channel digital readout electronics was used, able to digitize and process continuously the signals from each output ASIC channel. The digital system performs on-line fast pulse shape and height analysis, with a low dead-time and reasonable energy resolution at both low and high fluxes. The spectroscopic response …

0301 basic medicine030103 biophysicsNuclear and High Energy PhysicsMaterials sciencePreamplifierInstrumentationenergy-resolved photon counting detectordigital pulse shape analysienergy-resolved photon counting detectors01 natural sciencesCharge sharing03 medical and health scienceschemistry.chemical_compoundOpticshigh flux0103 physical sciencesInstrumentationX-ray and ?-ray detectorsNuclear and High Energy Physiccharge sharingRadiationdigital pulse shape analysisPixel010308 nuclear & particles physicsbusiness.industryCdZnTe detectorsCdZnTe detectorSettore FIS/01 - Fisica SperimentaleDetectorX-ray and γ-ray detectorBiasingSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Cadmium zinc telluridechemistryDirect couplingbusinessJournal of synchrotron radiation
researchProduct

Dual-polarity pulse processing and analysis for charge-loss correction in cadmium–zinc–telluride pixel detectors

2018

Charge losses at the inter-pixel gap are typical drawbacks in cadmium–zinc–telluride (CZT) pixel detectors. In this work, an original technique able to correct charge losses occurring after the application of charge-sharing addition (CSA) is presented. The method, exploiting the strong relation between the energy after CSA and the beam position at the inter-pixel gap, allows the recovery of charge losses and improvements in energy resolution. Sub-millimetre CZT pixel detectors were investigated with both uncollimated radiation sources and collimated synchrotron X-rays, at energies below and above the K-shell absorption energy of the CZT material. The detectors are DC coupled to fast and low…

0301 basic medicine030103 biophysicsNuclear and High Energy PhysicsMaterials sciencePreamplifierPhysics::Instrumentation and Detectors01 natural sciencesCollimated lightCharge sharinglaw.invention03 medical and health scienceschemistry.chemical_compoundOpticslawcharge losse0103 physical sciencesInstrumentationenergy-resolved photon-counting detectorsNuclear and High Energy Physiccharge lossescharge sharingRadiationPixel010308 nuclear & particles physicsbusiness.industryCdZnTe detectorsCdZnTe detectorDetectorSettore FIS/01 - Fisica Sperimentaleenergy-resolved photon-counting detectorSynchrotronSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Cadmium zinc tellurideX-ray and gamma-ray detectorschemistryDirect couplingbusinessX-ray and gamma-ray detector
researchProduct